Wifi Cisco C9124AXI-S

Model: C9124AXI-S - Cisco Catalyst 9124 Series Access Points
Detail:

Cisco Catalyst 9124 Wi-Fi 6 Outdoor AP, Internal Ant, -S Regulatory Domain

Tình trạng: Hàng Mới
Khả dụng Liên hệ
Chính sách bán hàng
  • Sản phẩm chính hãng
  • Giá cả cạnh tranh
  • Đầy đủ CO, CQ
  • Tư vấn tận tình
  • Đội ngũ kỹ thuật chuyên nghiệp

Tổng quan về Cisco Wifi C9124AXI-S

Trong bối cảnh chuyển đổi số diễn ra mạnh mẽ trên toàn cầu, nhu cầu triển khai mạng không dây ngoài trời ngày càng trở thành yếu tố then chốt đối với các doanh nghiệp, trường học, sân vận động và khu công nghiệp. Việc xây dựng một hệ thống Wifi ổn định, tốc độ cao và có khả năng chịu đựng thời tiết khắc nghiệt là yêu cầu bắt buộc, và đó chính là lý do Cisco cho ra đời dòng sản phẩm Wifi 6 ngoài trời Catalyst 9124 Series. Trong số đó, Wifi C9124AXI-S đang nổi lên như một giải pháp tối ưu, với sự kết hợp giữa thiết kế hiện đại, công nghệ tiên tiến và độ bền ấn tượng. Wifi C9124AXI-S là phiên bản được thiết kế chuyên biệt cho môi trường ngoài trời, thuộc Series Cisco Catalyst 9124AX, vốn được biết đến với khả năng hoạt động mạnh mẽ trong mọi điều kiện thời tiết. Việc sử dụng chuẩn Wi-Fi 6 (802.11ax) giúp thiết bị này trở thành một trong những Access Point dẫn đầu về hiệu suất truyền tải, đặc biệt trong các khu vực có mật độ người dùng cao.

Không chỉ là một bộ phát sóng Wifi thông thường, C9124AXI-S còn đóng vai trò quan trọng trong hệ sinh thái mạng dựa trên ý định (Intent-Based Networking) của Cisco, nơi mọi thành phần trong mạng đều được quản lý, tối ưu và tự động hóa thông minh. Thiết bị có khả năng xử lý lưu lượng tốc độ cao, giảm độ trễ và hỗ trợ hàng trăm người dùng đồng thời nhờ sự kết hợp của công nghệ OFDMA, MU-MIMO và khả năng vận hành thông minh theo tải thực tế. Chính vì vậy, đây là một lựa chọn hấp dẫn đối với những doanh nghiệp muốn nâng cấp hạ tầng Wifi ngoài trời theo hướng bền vững và hiệu quả lâu dài.

Đặc điểm nổi bật của Cisco Wifi C9124AXI-S

Điểm nổi bật đầu tiên khiến C9124AXI-S được đánh giá cao là hiệu suất Wi-Fi 6 mạnh mẽ. Chuẩn 802.11ax giúp thiết bị đạt tốc độ vượt trội so với chuẩn AC truyền thống, đồng thời tối ưu hóa việc chia sẻ tài nguyên mạng giữa nhiều người dùng. Nhờ công nghệ OFDMA, AP có thể phân chia tần số thành nhiều kênh con, cho phép nhiều thiết bị truyền dữ liệu song song và giảm đáng kể độ trễ khi có nhiều người truy cập cùng lúc. Điều này đặc biệt quan trọng tại các sân vận động, trường học hay khu du lịch, nơi mật độ người dùng Wifi luôn rất cao. Bên cạnh đó, C9124AXI-S hỗ trợ linh hoạt hai băng tần 2.4GHz và 5GHz, giúp tối ưu hóa phạm vi phủ sóng và tốc độ theo từng khu vực triển khai. Điểm đáng chú ý tiếp theo là thiết kế ăng-ten trong vượt trội. Nhờ tích hợp ăng-ten đa hướng ngay trong thân máy, thiết bị vừa đảm bảo hiệu năng phủ sóng đồng đều, vừa tạo sự thẩm mỹ cho không gian lắp đặt.

Về độ bền, C9124AXI-S được trang bị tiêu chuẩn IP67, đảm bảo khả năng chống bụi hoàn toàn và chịu được nước kể cả trong điều kiện mưa bão. Thiết bị được thiết kế để vận hành ổn định trong một dải nhiệt độ rất rộng, từ môi trường lạnh khắc nghiệt cho đến những khu vực ngoài trời có nhiệt độ cao. Đây là yếu tố không thể bỏ qua đối với các doanh nghiệp đang tìm kiếm một giải pháp Wifi hoạt động lâu dài mà không cần bảo dưỡng thường xuyên. Khả năng chống chịu tốt giúp thiết bị giảm thiểu tối đa rủi ro hỏng hóc, đồng nghĩa với việc giảm chi phí vận hành cho doanh nghiệp trong dài hạn. Không chỉ mạnh mẽ ở khả năng phát sóng Wifi, C9124AXI-S còn được trang bị khả năng kết nối đa dạng và hỗ trợ IoT, biến thiết bị trở thành một gateway quan trọng trong hạ tầng số hiện đại.

Cổng Multigigabit 2.5Gbps tích hợp giúp đảm bảo đường truyền tốc độ cao từ switch đến Access Point mà không gặp hiện tượng nghẽn cổ chai, điều thường xảy ra ở những thiết bị chỉ hỗ trợ cổng Gigabit truyền thống. Ngoài ra, AP còn tích hợp sẵn BLE và Zigbee, cho phép triển khai các mô hình IoT phức tạp như định vị tài sản, giám sát môi trường, hệ thống cảm biến không dây hoặc quản lý thiết bị thông minh mà không cần thêm gateway phụ. Điều này đặc biệt phù hợp với các nhà máy, bệnh viện hoặc các khu đô thị thông minh, nơi nhiều hệ thống IoT cần được kết nối và quản lý tập trung.

Thông số kỹ thuật cơ bản của Cisco Wifi C9124AXI-S

Feature

Benefits

Wi-Fi 6 (802.11ax)

The IEEE 802.11ax emerging standard, also known as High-Efficiency Wireless (HEW) or Wi-Fi 6, builds on 802.11ac. It delivers a better experience in typical environments with more predictable performance for advanced applications such as 4K or 8K video, high-density, high-definition collaboration apps, all-wireless offices, and IoT. Wi-Fi 6 is designed to use both the 2.4-GHz and 5-GHz bands, unlike the 802.11ac standard.

Uplink/downlink OFDMA

Orthogonal Frequency-Division Multiple Access (OFDMA)-based scheduling splits the bandwidth into smaller frequency allocations called Resource Units (RUs), which can be assigned to individual clients in both the downlink and uplink directions to reduce overhead and latency.

Uplink/downlink MU‑MIMO technology

Supporting two spatial streams, multiuser multiple-input multiple-output (MU-MIMO) enables access points to split spatial streams between client devices to maximize throughput.

BSS coloring

Spatial reuse (also known as Basic Service Set [BSS] coloring) allows the access points and their clients to differentiate between BSSs, thus permitting more simultaneous transmissions.

Target Wake Time

A new power-saving mode called Target Wake Time (TWT) allows the client to stay asleep and to wake up only at prescheduled (target) times to exchange data with the access point. This offers significant energy savings for battery-operated devices, up to 3 to 4 times the savings achieved by 802.11n and 802.11ac.

Cisco RF ASIC

Cisco RF ASIC is a fully integrated Software-Defined Radio (SDR) that can perform advanced RF spectrum analysis and delivers features such as Cisco CleanAir®, Wireless Intrusion Prevention System (wIPS), FastLocate, and Dynamic Frequency Selection (DFS).

Bluetooth® 5

Integrated Bluetooth Low Energy (BLE) 5 radio enables location-based use cases such as asset tracking, wayfinding, and analytics.

Multigigabit Ethernet support

Provides uplink speeds of 2.5G, 1G, and 100M. All speeds are supported on Category 5e cabling for an industry first, as well as 10GBASE-T (IEEE 802.3bz) cabling.

Nơi mua Cisco Wifi C9124AXI-S Series uy tín chất lượng

Hoàng Hải Tech chuyên cung cấp Cisco Wifi C9124AXI-S chính hãng giá tốt, đầy đủ CO, CQ. Với đội ngũ kỹ thuật đầy kinh nghiệm, chúng tôi đảm bảo sẽ mang đến cho Quý khách hàng sản phẩm và dịch vụ tốt nhất. Liên hệ với chúng tôi theo thông tin bên dưới để được tư vấn và báo giá tốt nhé.

Công ty Cổ phần Hệ thống Công nghệ Hoàng Hải

Địa chỉ: 536/43C Đường Âu Cơ, Phường 10, Quận Tân Bình, TP HCM.

SĐT: 0936 270 536 – Facebook: Hoàng Hải Tech JSC

Gmail: [email protected]

C9124AXI-S Specification

Part numbers Cisco Catalyst 9124AX Series Access Points: Outdoor environments, with internal antennas

●  C9124AXI-x: Cisco Catalyst 9124AX Series (internal omnidirectional antenna)

●  C9124AXD-x: Cisco Catalyst 9124AX Series (internal directional antenna)

●  C9124AXE-x: Cisco Catalyst 9124AX Series (External antenna) – Available second half 2021

Note: C9124AXE-x unavailable until Summer calendar year 2021.

Note: Catalyst 9124AXI-x and 9124AXD-x initially available in US and Canada only. Worldwide availability set for Summer, calendar year 2021.

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

Cisco Wireless LAN Services

●  AS-WLAN-CNSLT: Cisco Wireless LAN Network Planning and Design Service

●  AS-WLAN-CNSLT: Cisco Wireless LAN 802.11n Migration Service

●  AS-WLAN-CNSLT: Cisco Wireless LAN Performance and Security Assessment Service

Software ●  Catalyst 9124AXI, 9124AXD

●  Cisco IOS ® XE Software Release 17.5.1 or later

Supported wireless LAN controllers ●  Cisco Catalyst 9800 Series Wireless Controllers
802.11n version 2.0 (and related) capabilities ●  4×4 MIMO with four spatial streams

●  Maximal Ratio Combining (MRC)

●  802.11n and 802.11a/g

●  20- and 40-MHz channels

●  PHY data rates up to 890 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)

●  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)

●  802.11 Dynamic Frequency Selection (DFS)

●  Cyclic Shift Diversity (CSD) support

802.11ac ●  4×4 downlink MU-MIMO with four spatial streams

●  MRC

●  802.11ac beamforming

●  20-, 40-, 80- and 80+80-MHz channels

●  PHY data rates up to 3.47 Gbps (160 MHz with 5 GHz)

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  802.11 DFS

●  CSD support

●  WPA3 support

802.11ax ●  4×4 uplink/downlink MU-MIMO with four spatial streams

●  Uplink/downlink OFDMA

●  TWT

●  BSS coloring

●  MRC

●  802.11ax beamforming

●  20-, 40-, 80-, and 80+80-MHz channels

●  PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz)

●  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)

●  802.11 DFS

●  CSD support

●  WPA3 support

●  WPA3-Enterprise 192 support

Integrated antenna Catalyst 9124AXI

●  2.4 GHz: Peak gain 7 dBi, internal antenna, omnidirectional

●  5 GHz: Peak gain 7 dBi, internal antenna, omnidirectional

●  BLE Antenna Gain: 5 dBi

Catalyst 9124AXD

●  2.4 GHz: Peak gain 9 dBi, internal antenna, directional

●  5 GHz: Peak gain 9 dBi, internal antenna, directional

●  BLE Antenna Gain: 4 dBi

Interfaces Catalyst 9124AXI, 9124AXD

●  1x 100/1000/2500 BASE-T (Ethernet) uplink interface

●  1x Gigabit Ethernet SFP

 

●  1x 10/100/1000 BASE-T (Ethernet) downlink interface

·          Supports PoE output (802.3af compliant PSE) if C9124AX powered from one of the following

o    UPOE or 802.3bt inline power source (Switch or Power Injector)

o    DC input (with external power supply rated ³ 60W)

●  Management console port (RJ-45)

Indicators ●  Status LED indicates boot loader status, association status, operating status, boot loader warnings
Dimensions (W x L x H) ●  Access point (without mounting brackets):

◦      9124AXI, 9124AXD, 9124AXE: 10.2 x 9.2 x 3.2 in. (25.9 x 23.3 x 8.1 cm)

Weight 9124AXI, 9124AXD

●  6.5 lb. (2.9 kg)

Input power requirements ●  802.3af Power over Ethernet (PoE), 802.3at PoE+, 802.3bt PoE++, Cisco Universal PoE (Cisco UPOE ®)

●  Cisco power injector, AIR-PWRINJ-60RGD1= and AIR-PWRINJ-60RGD2=

●  Cisco power injector, AIR-PWRINJ6= (Note: This injector supports 802.3at)

●  DC power source: Auxiliary DC input, 24V to 56V

PoE Radio 0 SS Radio 1 SS Radio 2 SS Multigigabit SFP 1G PHY PoE O/P
.3af Disabled Disabled n/a 1G N N N
.3at 2×2 2×2 n/a 1G N Y N
.3bt/UPOE/DC 4×4 4×4 n/a 2.5G Y Y Y
Environmental Catalyst 9124AXI, 9124AXD

●  Nonoperating (storage) temperature: -40° to 185°F (-40° to 85°C)

●  Nonoperating altitude test: 17,000 ft (5182 m)

●  Operating temperature: -40° to 149°F (-40° to 65°C) with no solar loading, -40° to 131°F (-40° to 55°C) with solar loading

●  Operating altitude test: 17,000 ft (5182 m)

●  Operating humidity: 0% to 100% (condensing)

●  IEC 60529 Ingress Rating: IP66/IP67

●  Wind resistance up to 100 mph (161 km/h) sustained winds and 165 mph (266 km/h) wind gusts

●  Icing protection: MIL-STD-810F,13mm 13mm (0.5 in.)

●  Corrosion: NEMA 250-2008 (600 hrs. salt, 1200 hrs. mixed gas)

●  Solar radiation: EN 60068-2-5 (1120 W/m2)

●  Vibration: MIL-STD-810, Method 514.4

Available transmit power settings (max/min) 2.4 GHz

●  30 dBm (1W)

●  -4 dBm (0.4 mW)

5 GHz

●  30 dBm (1W)

●  -4 dBm(0.4 mW)

Regulatory domains Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance

For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.

Compliance ●  Safety:

◦      IEC 60950-1/IEC 60950-22

◦      IEC 62368-1

◦      EN 60950-1/EN 60950-22

◦      EN 62368-1

◦      AS/NZS 60950.1/AS/NZS 62368.1

◦      UL 60950-1/ UL 60950-22

◦      UL 62368-1

◦      CAN/CSA-C22.2 No. 60950-1/ 60950-22

◦      CAN/CSA-C22.2 No. 62368-1

●  Emissions:

◦      CISPR 32 (rev. 2015)

◦      EN 55032 (rev. 2015+A11:2020)

◦      EN61000-3-2 (rev. 2019)

◦      EN61000-3-3 (rev. 2013+A1:2019)

◦      KS C 9610-3-2:2020

◦      KS C 9610-3-3:2020

◦      AS/NZS CISPR 32 Class B (rev. 2015)

◦      47 CFR FCC Part 15B

◦      ICES-003, Issue 7

◦      VCCI-CISPR 32 : 2016

◦      CNS (rev. 13438)

◦      KS C 9832:2019

◦      QCVN 118:2018/BTTTT

●  Immunity:

◦      CISPR 24 (rev. 2010)

◦      EN 55024 + AMD 1(rev. 2010)

◦      EN 55035: 2017

◦      QCVN (TCVN 7317:2003)

◦      KS C 9835:2019

●  Emissions and immunity:

◦      EN 301 489-1 (v2.2.3 2019-11)

◦      EN 301 489-17 (v3.2.4 2020-09)

◦      QCVN 18:2014/BTTTT

◦      QCVN 112:2017/BTTTT

◦      KS X 3124:2020

◦      KS X 3126:2020

●  Radio:

◦      EN 300 328 (v2.2.2 2019-07)

◦      EN 301 893 (v2.1.1)

◦      AS/NZS 4268 (rev. 2017)

◦      47 CFR FCC Part 15C, 15.247, 15.407

◦      RSP-100

◦      RSS-GEN

◦      RSS-247

◦      China regulations SRRC

◦      LP0002 (rev 2020)

◦      Japan Std. 33a, Std. 66, and Std. 71

◦      QCVN (54:2020/BTTTT)

◦      QCVN (65:2013/BTTTT)

●  RF safety:

◦      EN 50385 (rev. Aug 2017)

◦      ARPANSA

◦      AS/NZS 2772 (rev. 2016)

◦      47 CFR Part 1.1310 and 2.1091

◦      RSS-102 (2015)

●  IEEE standards:

◦      IEEE 802.3

◦      IEEE 802.3ae

◦      IEEE 802.11a/b/g/n/ac/ax/h/d/u/k/v/r

◦      IEEE 802.15.1/802.15.4

●  Multimedia:

◦      Wi-Fi Multimedia (WMM)

●  Security:

◦      802.11i, Wi-Fi Protected Access 2 (WPA2), WPA, WPA3

◦      802.1X/AES/TKIP

●  Extensible Authentication Protocol (EAP) types:

◦      EAP-Transport Layer Security (TLS)

◦      EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2

◦      Protected EAP (PEAP) v0 or EAP-MSCHAP v2

◦      EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

◦      PEAP v1 or EAP-Generic Token Card (GTC)

◦      EAP-Subscriber Identity Module (SIM)

Data rate, transmit power, receive sensitivity ●  For information about data rate, transmit power, and receive sensitivity, refer to Cisco RF details (WIP)

Reviews

There are no reviews yet.

Bạn đang cần tư vấn về sản phẩm: Wifi Cisco C9124AXI-S?

Be the first to review “Wifi Cisco C9124AXI-S”

Email của bạn sẽ không được hiển thị công khai. Các trường bắt buộc được đánh dấu *

Bạn đang cần tư vấn về sản phẩm Wifi Cisco C9124AXI-S và giải pháp mạng? vui lòng để lại số điện thoại hoặc lời nhắn, chúng tôi sẽ liên hệ trả lời bạn sớm nhất