Line Cards C9400-LC-48H

Dòng sản phẩm:	C9400-LC-48H
Thông Tin :	Chi Tiết:C9400-LC-48H Cisco Catalyst 9400 Series 48-Port UPOE+ 10/100/1000 Tình Trạng: Brand New CO, CQ: Đầy đủ
Tình trạng:	Còn hàng
Khả dụng	Có sẵn

Tổng quan
Thông số kỹ thuật
Tải xuống

Cisco C9400-LC-48H cung cấp 48 cổng UPOE+ 10/100/1000 (RJ45) sử dụng cho các thiết bị C9404R C9407R C9410R.Các tính năng nổi bật của Cisco C9400-LC-48H Module

– Hỗ trợ hệ điều hành Cisco IOS XE Software Release 16.8.1 hoặc cao hơn

– IEEE 802.1AE (MACsec-256)

– Layer 2 to Layer 4 Jumbo Frame hỗ trợ tới 9198 bytes

– Lý tưởng cho các doanh nghiệp và các ứng dụng chi nhánh đòi hỏi phải có hiệu năng nâng cao để truyền tệp lớn và sao lưu mạng

Thiết bị mạng Cisco Catalyst 9400 Series 48-Port UPOE+ 10/100/1000 Module (C9400-LC-48H)

Description	48-port, 10/100/1000 BASE-T Gigabit Ethernet, IEEE 802.3bt compliant module supporting up to 90 W Cisco UPOE+ on each of its 48 RJ45 ports. Hardware ready for IEEE 1588/802.1as— A Precision Time Protocol (PTP) used for time synchronization across the network for video and audio applications. Supports Cisco Phone Discovery and IEEE 802.3af, IEEE 802.3at, and IEEE 802.3bt. Supports Energy Efficient Ethernet (EEE) Supports PoE Cable Loss Management Saves power with direct power delivery from backplane Has a built-in, front-facing, passive RFID tag that uses Ultra High Frequency (UHF) RFID technology and requires an RFID reader with compatible software. It provides auto-identification capabilities for asset management and tracking. The RFID tags are compatible with the Generation 2 GS1 EPC Global Standard and are ISO 18000-6C compliant. They operate in the 860- to 960-MHz UHF band. For more information The following switching module features are configured in software. See the software configuration guide for more information: Provides per port power consumption measurement Enables you to specify maximum power consumption on every port Supports PoE Power Configuration The 10-slot (Catalyst 9410R Switch) chassis has a maximum of 384 1Gbps ports but can support up to 260 90W PoE ports concurrently.
Per Slot Bandwidth	48 Gbps, full duplex non-blocking traffic
Minimum / Maximum Port Density⁷	Catalyst 9404R Switch—48 / 96 Catalyst 9407R Switch—48 / 240 Catalyst 9410R Switch—48 / 384
Support and Restrictions	Can be installed in any non-supervisor module slot. Ensure that the chassis power supply configuration supports the PoE budget adequately. Use the Cisco Power Calculator for power budgeting estimates and to determine power supply requirements for a specific PoE configuration. Some legacy Cisco powered devices (like 7910, 7940, 7960 IP phones and AP350 wireless access points) are incompatible with Type 4 Power Supply Equipments (PSEs), as defined in the IEEE 802.3bt standard. If connected, the PSE reports a ‘Tstart’ or ‘Imax’ fault with each periodic attempt at providing power to the powered device. For continued use of these legacy Cisco powered devices, connect them to Cisco PoE+/UPOE PSEs. C9400-LC-48H module is supported only on Cisco IOS XE Release 16.12.1 and later releases. Before inserting the module, ensure that the device software is Cisco IOS XE Release 16.12.1 or a later release. Before downgrading the software on the device from Cisco IOS XE 16.12.1 to earlier releases, ensure that you remove the C9400-LC-48H module.

Line Cards C9400-LC-48H

Thiết bị mạng Cisco Catalyst 9400 Series 48-Port UPOE+ 10/100/1000 Module (C9400-LC-48H)

Sản Phẩm Liên Quan